My Life and Work - Henry Ford (classic novels for teens TXT) 📗

worth five cents an hour. If the owner of a skyscraper could increase his income 10 per cent., he would willingly pay half the increase just to know how. The reason why he owns a skyscraper is that science has proved that certain materials, used in a given way, can save space and increase rental incomes. A building thirty stories high needs no more ground space than one five stories high. Getting along with the old-style architecture costs the five-story man the income of twenty-five floors.

Save ten steps a day for each of twelve thousand employees and you will have saved fifty miles of wasted motion and misspent energy.

 

Those are the principles on which the production of my plant was built up. They all come practically as of course. In the beginning we tried to get machinists. As the necessity for production increased it became apparent not only that enough machinists were not to be had, but also that skilled men were not necessary in production, and out of this grew a principle that I later want to present in full.

 

It is self-evident that a majority of the people in the world are not mentally—even if they are physically—capable of making a good living.

That is, they are not capable of furnishing with their own hands a sufficient quantity of the goods which this world needs to be able to exchange their unaided product for the goods which they need. I have heard it said, in fact I believe it is quite a current thought, that we have taken skill out of work. We have not. We have put in skill. We have put a higher skill into planning, management, and tool building, and the results of that skill are enjoyed by the man who is not skilled. This I shall later enlarge on.

 

We have to recognize the unevenness in human mental equipments. If every job in our place required skill the place would never have existed.

Sufficiently skilled men to the number needed could not have been trained in a hundred years. A million men working by hand could not even approximate our present daily output. No one could manage a million men.

But more important than that, the product of the unaided hands of those million men could not be sold at a price in consonance with buying power. And even if it were possible to imagine such an aggregation and imagine its management and correlation, just think of the area that it would have to occupy! How many of the men would be engaged, not in producing, but in merely carrying from place to place what the other men had produced? I cannot see how under such conditions the men could possibly be paid more than ten or twenty cents a day—for of course it is not the employer who pays wages. He only handles the money. It is the product that pays the wages and it is the management that arranges the production so that the product may pay the wages.

 

The more economical methods of production did not begin all at once.

They began gradually—just as we began gradually to make our own parts.

“Model T” was the first motor that we made ourselves. The great economies began in assembling and then extended to other sections so that, while to-day we have skilled mechanics in plenty, they do not produce automobiles—they make it easy for others to produce them. Our skilled men are the tool makers, the experimental workmen, the machinists, and the pattern makers. They are as good as any men in the world—so good, indeed, that they should not be wasted in doing that which the machines they contrive can do better. The rank and file of men come to us unskilled; they learn their jobs within a few hours or a few days. If they do not learn within that time they will never be of any use to us. These men are, many of them, foreigners, and all that is required before they are taken on is that they should be potentially able to do enough work to pay the overhead charges on the floor space they occupy. They do not have to be able-bodied men. We have jobs that require great physical strength—although they are rapidly lessening; we have other jobs that require no strength whatsoever—jobs which, as far as strength is concerned, might be attended to by a child of three.

 

It is not possible, without going deeply into technical processes, to present the whole development of manufacturing, step by step, in the order in which each thing came about. I do not know that this could be done, because something has been happening nearly every day and nobody can keep track. Take at random a number of the changes. From them it is possible not only to gain some idea of what will happen when this world is put on a production basis, but also to see how much more we pay for things than we ought to, and how much lower wages are than they ought to be, and what a vast field remains to be explored. The Ford Company is only a little way along on the journey.

 

A Ford car contains about five thousand parts—that is counting screws, nuts, and all. Some of the parts are fairly bulky and others are almost the size of watch parts. In our first assembling we simply started to put a car together at a spot on the floor and workmen brought to it the parts as they were needed in exactly the same way that one builds a house. When we started to make parts it was natural to create a single department of the factory to make that part, but usually one workman performed all of the operations necessary on a small part. The rapid press of production made it necessary to devise plans of production that would avoid having the workers falling over one another. The undirected worker spends more of his time walking about for materials and tools than he does in working; he gets small pay because pedestrianism is not a highly paid line.

 

The first step forward in assembly came when we began taking the work to the men instead of the men to the work. We now have two general principles in all operations—that a man shall never have to take more than one step, if possibly it can be avoided, and that no man need ever stoop over.

 

The principles of assembly are these:

 

(1) Place the tools and the men in the sequence of the operation so that each component part shall travel the least possible distance while in the process of finishing.

 

(2) Use work slides or some other form of carrier so that when a workman completes his operation, he drops the part always in the same place—which place must always be the most convenient place to his hand—and if possible have gravity carry the part to the next workman for his operation.

 

(3) Use sliding assembling lines by which the parts to be assembled are delivered at convenient distances.

 

The net result of the application of these principles is the reduction of the necessity for thought on the part of the worker and the reduction of his movements to a minimum. He does as nearly as possible only one thing with only one movement. The assembling of the chassis is, from the point of view of the non-mechanical mind, our most interesting and perhaps best known operation, and at one time it was an exceedingly important operation. We now ship out the parts for assembly at the point of distribution.

 

Along about April 1, 1913, we first tried the experiment of an assembly line. We tried it on assembling the flywheel magneto. We try everything in a little way first—we will rip out anything once we discover a better way, but we have to know absolutely that the new way is going to be better than the old before we do anything drastic.

 

I believe that this was the first moving line ever installed. The idea came in a general way from the overhead trolley that the Chicago packers use in dressing beef. We had previously assembled the flywheel magneto in the usual method. With one workman doing a complete job he could turn out from thirty-five to forty pieces in a nine-hour day, or about twenty minutes to an assembly. What he did alone was then spread into twenty-nine operations; that cut down the assembly time to thirteen minutes, ten seconds. Then we raised the height of the line eight inches—this was in 1914—and cut the time to seven minutes. Further experimenting with the speed that the work should move at cut the time down to five minutes. In short, the result is this: by the aid of scientific study one man is now able to do somewhat more than four did only a comparatively few years ago. That line established the efficiency of the method and we now use it everywhere. The assembling of the motor, formerly done by one man, is now divided into eighty-four operations—those men do the work that three times their number formerly did. In a short time we tried out the plan on the chassis.

 

About the best we had done in stationary chassis assembling was an average of twelve hours and twenty-eight minutes per chassis. We tried the experiment of drawing the chassis with a rope and windlass down a line two hundred fifty feet long. Six assemblers traveled with the chassis and picked up the parts from piles placed along the line. This rough experiment reduced the time to five hours fifty minutes per chassis. In the early part of 1914 we elevated the assembly line. We had adopted the policy of “man-high” work; we had one line twenty-six and three quarter inches and another twenty-four and one half inches from the floor—to suit squads of different heights. The waist-high arrangement and a further subdivision of work so that each man had fewer movements cut down the labour time per chassis to one hour thirty-three minutes. Only the chassis was then assembled in the line. The body was placed on in “John R. Street”—the famous street that runs through our Highland Park factories. Now the line assembles the whole car.

 

It must not be imagined, however, that all this worked out as quickly as it sounds. The speed of the moving work had to be carefully tried out; in the flywheel magneto we first had a speed of sixty inches per minute. That was too fast. Then we tried eighteen inches per minute.

That was too slow. Finally we settled on forty-four inches per minute.

The idea is that a man must not be hurried in his work—he must have every second necessary but not a single unnecessary second. We have worked out speeds for each assembly, for the success of the chassis assembly caused us gradually to overhaul our entire method of manufacturing and to put all assembling in mechanically driven lines.

The chassis assembling line, for instance, goes at a pace of six feet per minute; the front axle assembly line goes at one hundred eighty-nine inches per minute. In the chassis assembling are forty-five separate operations or stations. The first men fasten four mud-guard brackets to the chassis frame; the motor arrives on the tenth operation and so on in detail. Some men do only one or two small operations, others do more.

The man who places a part does not fasten it—the part may not be fully in place until after several operations later. The man who puts in a bolt does not put on the nut; the man who puts on the nut does not tighten it. On operation number thirty-four the budding