The Online World - Odd de Presno (top 10 non fiction books of all time TXT) 📗

to switch my communications computer on. While I visit the bathroom, my communications program calls three online services, retrieve and send information. When the script has disconnected from the first service, which is my bulletin board, it analyzes the received data. I want an alphabetic list of visitors since my last visit, a sorted list of downloaded programs, and names of those calling in at 9600 bps or higher. Sometimes, the unexpected happen. There may be noise on the line, or a sudden disconnect. Usually, my script can solve this without manual intervention. It is therefore allowed to work unattended most of the time. When I get to my office after breakfast, it is all done. My communications program is set for reading and responding to today's email. I can sit down, and immediately get to work. After having written all my replies, I say "send" to my system. For me, it's time for another cup of coffee. I am not needed by the keyboard while my mail is being sent. This is what an automatic communications system can do. My scripts also help plan and prepare online visits, and ease my work by postprocessing results.

| When your communication is fully automated, you need not |

| read incoming data while it scrolls over your screen, and |

| then again after logging off the service. You do it only |

| once. |

How to get it? Here are some alternatives:

Alternative 1: Write your own system

You can write procedures for powerful script-driven programs like ProYam (from Omen Technology) and Crosstalk MK IV.

I started writing scripts for ProYam over seven years ago. The system is constantly expanded to include new services, refined to include more functions, and enhanced to become more robust. The scripts make my system work like an autopilot. It calls online services, navigates, retrieves and sends data. Postprocessing includes automatic reformatting of retrieved data, transfers to various internal databases, statistics, usage logs, and calculation of transfer costs. Such scripts can do quite complex operations online. For example, it can - Buy and sell stock when today's quotes are over/under given limits, - Select news stories and other types of information based on information found in menus or titles.

Script writing is not for everybody. It is complicated, and takes a lot of time. Therefore, it is only for the specially interested.

On the other hand, those going for it seldom regret. Tailor- made communication scripts give a wonderful flexibility. The software does not cost much, but again, it takes a lot of time!

| Do not use large and complex script files before you know the |

| online service well. The scripts let you do things quicker and |

| safer, but there is always a possibility for unexpected |

| problems. |

| |

| Test your scripts for a long time to make them robust by |

| "training" them to handle the unexpected. Leave them to work |

| unattended when you are reasonably certain that they can do |

| the job. - It may take months to get to that point. |

| |

| Build a timeout feature into your scripts, so that they don't |

| just hang there waiting for you after an encounter with fate. |

Alternative 2: Use scripts made by others

Some script authors generously let others use their creations. Earle Robinson of CompuServe's IBM Europe Forum, share his ProYam scripts for automatic usage of CompuServe with others. They are available from the IBM Communication Forum library.

Enter GO XTALK on CompuServe to find advanced script files for Crosstalk Mk.4. ZCOMM and ProYam scripts for visiting my board automatically can be freely downloaded there. They split access up into these three phases: Phase 1: Menu driven offline preparation. Phase 2: Automatic logon, navigation through the system, and automatic disconnection. Phase 3: Automatic offline postprocessing.

You will find scripts for other programs on many online services.

Alternative 3: Special software

Several online services sell communication programs with built-in functions that provides you with automation. They can have offline functions for reading and responding to mail. The degree of automation varies.

There are also many programs written by third parties. Most programs assume that you use 'expert' as your default operating mode on the online service. TapCIS, Autosig (ATO), OzCIS, CISOP, CompuServe Navigator (for Macintosh), AutoPilot (for Amiga), ARCTIC (for Acorn Archimedes), and QuickCIS (for Atari) are popular choices on CompuServe. TapCIS is my personal favorite. (CIM does not offer much automation!) Aladdin is for GEnie. It automates your use of RoundTables (conferences), file areas, and mail. Dialog users turn to Dialog- Link. Nexis News Plus (for Nexis, US$50) has pull-down menus and detailed selection of commands. This MS-DOS program helps users set up detailed search commands before logging on to the Mead Data Central. Your search results will be downloaded automatically. Personal Bibliographics Software, Inc. (Ann Arbor, Mich, U.S.A. Tel.: +1-313-996-1580) sells Pro-Search to Dialog and BRS users (for Macintosh and MS-DOS). Pro-Search will lead you through menus to find information on both services. It translates your plain English search commands into the cryptic search language used by the services. It logs on automatically, connects to these services, finds your information, and shows you the hits.

Alternative 4: Offline readers

The alternatives above have one important weakness. Noise on the line can prevent the "robot" from doing the job. All it takes is for noise to give a prompt another content than is expected by your program or script (as in "En@er a number:" instead of "Enter a number:").

You can avoid noise problems by using get commands (see Chapter 15), and by making the online service use its minimum prompts ('expert mode') . Still, this does not give full protection. The best is to let the online service do the navigation. Think of it as logging on to run a batch file on the remote computer. Combine this with automatic transfers of your commands, transmitted in of one stream of data with automatic error correction (in the software and in the modem), and you have a very robust system. The program logs on to the service. Then the service takes over. It registers your user identity, checks your user profile for personal interests, retrieves and packs all messages, news and files into one compressed file, and sends it to you at high speed. Your outgoing messages, search commands, commands to join or leave conferences, and more, are transferred to the remote computer in a similar packet (compressed file). When received by the remote computer, it unpacks the transfer file and distributes messages and commands to various services following your instructions. Your "physical" contact with the service is when your modem is disconnected. The help menus that you read belong to your program, and not the online service. You read and respond to mail in a reading module (ref. the term "offline reader"). Some offline readers give the caller access to more tools than is available on the online service itself. They may have spelling checkers, multimedia support, let you use your favorite editor or word processor, and offer various storage, search, and printing options. Using offline readers is probably the easiest, cheapest, and safest way of using online services. These "readers" are popular among bulletin board users, and some commercial services are also starting to accommodate them. There are many offline reader programs. The most advanced take over completely upon logon, and manage transfers of commands and compressed information files to and from the host. (Example: Binkley Term on FidoNet) Global Link is an offline reader for EcoNet. Bergen By Byte offers the BBS/CS Mail Grabber/Reader, a script system used with the communications program Telix and the service's "auto-get" function. The most popular systems on the PCBoard based Thunderball Cave BBS are Offline Express, Megareader, Session Manager, Rose Reader and EZReader. These are used with scripts written for various communication programs. Some of them have built in communications (and script) modules. EZReader from Thumper Technologies (P.O. Box 471346, Tulsa, OK 74147-1346, U.S.A.) lets users retrieve mail from several online systems using transfer formats such as QWK, PCBoard capture files, ProDoor ZIPM files, XRS, MCI Mail, and others. Cost: US$49 (1992). 1stReader from Sparkware (Post Office Box 386, Hendersonville, Tennessee 37077, U.S.A.) is my personal favorite for accessing Qmail based online systems.

| Note: Some offline readers contain all the features required |

| for fully automated communications. Some bulletin boards allow |

| up- and downloading to start right after CONNECT. |

| Off-Line Xpress, an offline mail reader for QWK (Qwikmail) |

| packets, does not contain a communications module. It just does |

| pre- and postprocessing of mail packets. |

| You can use the Off-Line Xpress as one element in a larger |

| automated system. For example, a system for access to PCBoard |

| bulletin boards may consist of Off-Line Xpress software, PKZIP |

| and PKUNZIP (popular shareware programs to compress/decompress |

| mail packets), the QMODEM communications program, and a script |

| to navigate to/from the QWK packet send and receive area on the |

| BBS. |

|