Living Like Ed by Ed Jr. (whitelam books .txt) 📗

Before the painter came, I had a company go around the house and drill holes above and below the fire block in between the studs. The fire block is a small piece of wood at shoulder level, approximately, that fills the void between the vertical two-by-fours. It slows a fire from spreading because it blocks the “chimney” effect between the vertical combustible wood. Every 16 inches, on center, there are studs, which are the vertical members on any house. These guys went between the studs and blew in cellulose insulation. I think they charged me about a thousand dollars, but right away, the house got quieter, and it got more energy efficient.

DOUBLE-PANE WINDOWS

Walls and attics are not the only parts of your home that need insulation. A pretty sizable portion of your home’s perimeter is made up of windows.

Windows can be one of your home’s most attractive features. They provide natural light, beautiful views, and ventilation. A certain ratio of windows to floor space is even required by law—for light, for ventilation, and to provide escape routes in case of fire.

Unfortunately, most windows have a very low R-value, some-where around R-1 or R-2. That means they can be responsible for a lot of wasted energy—up to 25 percent of your home heating bill.

It’s pretty easy to tell how efficient your windows are. Can you feel a draft when you’re sitting or standing near one? Put your hand on a window. Does it feel cold in the winter or hot in the summer? If so, you’re losing energy.

Double-pane windows are just what they sound like: two panes of glass (or sometimes plastic) in a single frame with a bit of air in between. That sandwich of air reduces heat transfer, keeping cold air outside from sucking the heat right out of your house in the winter. It also keeps warm air outside in the summer from transferring through a single thin pane of glass and heating up the inside of your home

                  I was concerned when we decided to make the switch to double-pane windows. I didn’t want this adorable (albeit tiny) 1930s home to have ugly-looking windows just so Ed could save a few bucks and use less energy. Adding modern-style windows to this older house would look awful!

But Ed did his homework and actually found out that the manufacturer who had made our windows back in 1936 was still around, and they make double-pane windows that look just like our originals. There are many window companies that make double-panes in a variety of looks, so the style of your home won’t be compromised.

You know, when Ed first wanted to replace all of our windows with double pane, I just thought, “Why are we spending all this money on something we already have?” I didn’t really get it. But our energy usage has gone down. And what I love the most is that now I can’t hear a thing! We live in a busy area, right across from a school, a block from a busy road, and a few miles from an airport. Over the years, I had grown to live with kids yelling, cars honking, and planes taking off. After the double-pane windows were installed, though, I felt like I was in the secluded countryside. Even if you’re worried you won’t save that much money on your energy bill (which you will), the silence itself is worth every penny.

Rachelle’s right. These are quality windows. The others didn’t seal as well. These have little gaskets on them. The hardware is very nice. They’re just wonderful windows, and they’ll be around longer than this house will. They’ll be taking them out and putting them in another house someday.

Choosing the Right Windows

Window technology has become so advanced that you can now get windows that have been fabricated specifically for your climate. Somebody who lives in Minnesota wouldn’t want to install the same windows as somebody who lives in Miami. Not only is there obviously a dramatic difference in temperatures between those two regions, but there’s also a difference in the amount and the strength of direct sunlight.

To meet the needs of homeowners living in different places—and working with different budgets—window manufacturers offer all kinds of options. Besides double-pane windows, there are triple- and even quadruple-pane windows. Though they are a little more expensive, triple-pane windows are a good match if you live in an environment that has harsh, long winters. It’s just another added layer of protection from heat transfer.

You also can find windows with a larger airspace between panes, which also increases energy efficiency. And you can find windows with gas (usually argon) instead of air between the panes. Argon is denser and has lower conductivity than air, so it reduces heat loss—or heat gain—through the window even more.

Windows are offered with different coatings, too. Tinted glass and tinted window films are designed to reduce heat gain through windows—primarily for people in warm climates. Windows with low-e, or low-emissivity, coatings come in different styles to meet different needs. Some are designed for people in cold-weather areas to reduce heat loss through the windows in winter. Others are designed for people in hot climates to reduce heat gain through the windows in summer.

Making Any Windows More Efficient

Even if you aren’t ready for the expense of replacing your windows—or if you’re renting a home right now—there are ways to make the windows you already have more energy efficient.

                  Curtains, blinds, shades, and shutters are a fantastic way to add color and texture to a room. They give you a great opportunity to show off an accent color from a couch or bring a new, dramatic feel into your bedroom. They can make an impressive interior design statement. But did you know they’re also a great way to save energy?

This is especially true in the winter. At night when it’s cooler, just